induracoat dark background logo

Wastewater Solutions

Durable coatings for demanding environments

Protective Coatings for Wastewater Equipment

Polyurea coatings & liners are the state-of-the-art technology for the demanding environments and chemical exposure that occur in wastewater and water utilities. These high performance thick film industrial coatings and linings provide durable, waterproof, seamless, impermeable, and abrasion-resistant barriers against a variety of liquids and chemicals.

VersaFlex Spray Polyurea

VersaFlex FSS 45DC is a fast set, rapid gelling, 100% solids, flexible, two- component polyurea elastomer spray coating material. FSS 45DC is used by itself or in combination with other materials to produce coatings, liners, wearing courses, and resilient surfaces on concrete and other substrates.

FSS 45DC produces an extremely tough film at all thicknesses. FSS 45DC may be applied in all positions and to any properly prepared substrate. 

FSS 45DC is inert, it will not hydrolyze, leach, or contaminate other materials, and is bondable and paintable. FSS 45DC is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions.

Overview

VersaFlex FSS 45DC is a superior coating material designed specifically for industrial applications receiving constant or intermittent attack from contained materials, subsurface hydrostatic pressure, most corrosive substances, and abrasive action. FSS 45DC is flexible, accommodating to movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations.

With or without reinforcements, FSS 45DC may be used in transitional areas with confidence. FSS 45DC may be used in interior or exterior applications.

waste water plant

Ideal Applications

  • Industrial Facilities
  • Parking Garage Decks
  • Below Grade Waterproofing
  • Above Grade Dampproofing
  • Water & Wastewater Treatment
  • Food Processing Facilities
  • Pulp & Paper Mills
  • Bottling & Canning Facilities
  • Walkways & Balconies
  • Secondary Containment

Performance Benefits

  • 100% Solids
  • No VOC's
  • Odourless - No Toxic Vapours
  • Tough Elastomeric Membrane
  • Excellent Thermal Stability
  • Minimal Downtime
  • Low Permeance Rate
  • Good Resistance to a Wide Range of Chemical Attacks
  • USDA Approved
  • Operating Temperatures of -40˚F to 350˚F

Past Projects

Vancouver St. Victoria BC

Water Quality / Structural Improvement Vancouver St. | Fort St. to McClure St. Client: City of Victoria - Victoria, BC Canada Date: November 2014 Summary In the fall of 2014, Induracoat was awarded a bid to line over 300 meters of Victoria's aging water mains. The project required minimal impact on traffic flows in the area, […]

Read More
Sumas St. Victoria BC

Water Quality / Structural Improvement Sumas St. | Garbally St. to Manchester St. Client: City of Victoria - Victoria, BC Canada Date: November 2014 Summary In 2014 Induracoat continued to provide The City of Victoria with further lining solutions. In this instance, Induracoat lined over 180 meters of 150mm pipe throughout the Sumas Street neighbourhood, including Garbally through Manchester […]

Read More
Pandora Ave. Victoria BC

Water Quality / Structural Improvement Pandora Ave. | Douglas St. to Government St. Client: City of Victoria - Victoria, BC Canada Date: July 2016 Summary In 2016, Induracoat again provided lining services for The City of Victoria on Padora Avenue. this line services Victoria City Hall, a local TV station (CTV Vancouver Island) and a centrally located hotel (the […]

Read More
induracoat dark background logo

Canadian Induracoat Corporation (Induracoat) is a Canadian company and leading applicator of specialized Polyurea Protective Industrial Coatings throughout Canada.

Focusing on the needs and priorities of our customers, Induracoat offers industry leading “Green” solutions through its Polyurea spray coating systems.

Contact Us

Ph: 1.855.652.0812

Head Office - Victoria
Unit B - 6670 Bertram Place, Victoria BC V8M 1Z6

Vancouver
Unit 121 - 408 East Kent Ave, South Vancouver BC V5X 2X7

Edmonton
4th Floor - 10665 Jasper Avenue Edmonton Alberta T5J 3S9

Winnipeg
Suite 300, 330 St. Mary Ave, Winnipeg MB R3C 3Z5

© Canadian Induracoat Corporation 2024

Website Designed and Maintained by Encompass Business Solutions

linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram