Potable water protective coatings are increasingly becoming important as environmental awareness is heightened; everyone wants clean drinking water, and having a protective coating for the reservoir, containment, or vessel is most important.
VersaFlex’s AquaVers® line of Potable Water coatings are of the highest quality, and have been ANSI / NSF 61.5 certified for containment vessels as small as 50 gallons. Currently there are few, if any, other manufacturers of potable water coatings who can claim such high standards for their protective coatings — many are only usable in containments of 100,000 gallons or larger, making them relatively restricted to very large reservoirs only.
Return to Service in 60 Minutes
VersaFlex's AquaVers is a fast-set, rapid curing, 100% solids, flexible, two-component pure polyurea spray coating material. The rapid-set capabilities minimizes downtime and maximizes efficiency and cost-reduction.
Performance Benefits
Certified: The 100% solids polyurea formulation is NSF/ANSI-61.5 Certified Barrier Material.
Strong: Good resistance to a wide range of chemical attack.
Fast: The unique polyurea formulation sets in 2 minutes and reaches full cure in 60 minutes, allowing for same day return to service.
Flexible: > 400% elongation capabilities with excellent thermal stability.
Water Quality / Structural Improvement Vancouver St. | Fort St. to McClure St. Client: City of Victoria - Victoria, BC Canada Date: November 2014 Summary In the fall of 2014, Induracoat was awarded a bid to line over 300 meters of Victoria's aging water mains. The project required minimal impact on traffic flows in the area, […]
Water Quality / Structural Improvement Sumas St. | Garbally St. to Manchester St. Client: City of Victoria - Victoria, BC Canada Date: November 2014 Summary In 2014 Induracoat continued to provide The City of Victoria with further lining solutions. In this instance, Induracoat lined over 180 meters of 150mm pipe throughout the Sumas Street neighbourhood, including Garbally through Manchester […]
Water Quality / Structural Improvement Pandora Ave. | Douglas St. to Government St. Client: City of Victoria - Victoria, BC Canada Date: July 2016 Summary In 2016, Induracoat again provided lining services for The City of Victoria on Padora Avenue. this line services Victoria City Hall, a local TV station (CTV Vancouver Island) and a centrally located hotel (the […]
Canadian Induracoat Corporation (Induracoat) is a Canadian company and leading applicator of specialized Polyurea Protective Industrial Coatings throughout Canada.
Focusing on the needs and priorities of our customers, Induracoat offers industry leading “Green” solutions through its Polyurea spray coating systems.
Ph: 1.855.652.0812
Head Office - Victoria
Unit B - 6670 Bertram Place, Victoria BC V8M 1Z6
Vancouver
Unit 121 - 408 East Kent Ave, South Vancouver BC V5X 2X7
Edmonton
4th Floor - 10665 Jasper Avenue Edmonton Alberta T5J 3S9
Winnipeg
Suite 300, 330 St. Mary Ave, Winnipeg MB R3C 3Z5
Website Designed and Maintained by Encompass Marketing & Design
