The repair of random cracks and application of a coating in a secondary containment area was a major concern at this airplane manufacturing plant. Due to the limited shutdown time and low October temperatures most conventional coating systems were ruled out.
VersaFlex rapid curing polyurea sealants and coatings were specified and successfully installed. The random cracks were ground out and filled with VersaFlex SLl 75, which took less than I hour to cure.
Aqualok concrete sealer and primer was then installed to inssure proper bonding.
VersaFlex FSS 45 DC-F polyurea spray, with a 5 second gel time, was applied at a film thickness of 65mils.
The entire project was completed from start to finish in just 4 days, which was half the time it would have taken using a conventional coating system.
Project: Major fracture repair and secondary concrete containment coating
Owner: A major airplane manufacturing company, Wichita, Kansas
Contractor: Doyle, Reed Painting Company
Coating System: VersaFlex SU75 for crack repair and FSS 45DC-F Polyurea
Project Scope: 6,500 S.F.
Installation: October 1995
Spray-in-Place-Pipe Rehabilitation Canadian Induracoat Corporation (Induracoat) will be holding two Spray-In-Place-Pipe Rehabilitation demonstrations at the Trenchless Technology Roadshow in Kelowna, BC on April 25th. Induracoat is the Canadian Authorized Applicator for the latest generation fast-set pipe lining polymer, Resiline 320 Pipe Renewal Liner. The details of the presentations are below: Spray-In-Place-Pipe Lining Demonstration - Monday April […]
VersaFlex AquaVers 405 is a superior coating material designed specifically for industrial applications receiving constant or intermittent attack from contained materials, subsurface hydrostatic pressure, most corrosive substances and abrasive action. AquaVers 405 is flexible, accommodating to movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations. With or […]
VersaFlex FSS 50DM is a fast set, rapid curing, 100% solids, flexible, two-component polyurea elastomer spray coating material. FSS 50DM is used by itself or in combination with other materials to produce coatings, liners, wearing courses, and resilient surfaces on metal and other substrates. FSS 50DM produces an extremely tough film at all thicknesses. Single or multiple pass applications […]
Canadian Induracoat Corporation (Induracoat) is a Canadian company and leading applicator of specialized Polyurea Protective Industrial Coatings throughout Canada.
Focusing on the needs and priorities of our customers, Induracoat offers industry leading “Green” solutions through its Polyurea spray coating systems.
Ph: 1.855.652.0812
Head Office - Victoria
Unit B - 6670 Bertram Place, Victoria BC V8M 1Z6
Vancouver
Unit 121 - 408 East Kent Ave, South Vancouver BC V5X 2X7
Edmonton
4th Floor - 10665 Jasper Avenue Edmonton Alberta T5J 3S9
Winnipeg
Suite 300, 330 St. Mary Ave, Winnipeg MB R3C 3Z5
Website Designed and Maintained by Encompass Marketing & Design
