induracoat dark background logo
induracoat dark background logo

VersaFlex FSS 50DM Aromatic Spray Polyurea

VersaFlex FSS 50DM is a fast set, rapid curing, 100% solids, flexible, two-component polyurea elastomer spray coating material. FSS 50DM is used by itself or in combination with other materials to produce coatings, liners, wearing courses, and resilient surfaces on metal and other substrates. 

FSS 50DM produces an extremely tough film at all thicknesses. Single or multiple pass applications produce films from 10 mils to 1,000 mils without appreciable sag or runs. FSS 50DM may be applied in all positions and to any properly prepared substrate. 

FSS 50DM is inert, it will not hydrolyze, leach, or contaminate other materials, and is bondable and paintable. FSS 50DM is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions.

Applications & Uses

VersaFlex FSS 50DM is a superior metal coating material designed specifically for industrial applications receiving constant or intermittent attack from contained materials, most corrosive substrates and abrasive action. FSS 50DM may be used to coat any properly prepared substrate. FSS 50DM is flexible, accommodating to movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations.

With or without reinforcements, FSS 50DM may be used in transitional areas with confidence. FSS 50DM may be used in interior or exterior applications. FSS 50DM is recommended for repair of other films, may be applied to metal and other substrates, in new construction and in cold weather conditions.

Ideal for Applications In:

  • Waterproofing Membrane
  • Chemical Plants
  • Metal Coating
  • Tank Linings
  • Secondary Containment
  • Liners

Performance Benefits

  • Odorless, No VOC's
  • 1:1 Mix Ratio by Volume
  • Fast Return to Service 
  • Rapid Gel Time
  • Installation temperature range from -40° to 300°F
  • Operating Temperatures  -40° to 350°F

Data Sheets & MSDS Specifications

VersaFlex FSS 50DM MSDS Sheet A

VersaFlex FSS 50DM MSDS Sheet B

VersaFlex FSS 50DM Data Sheet

VersaFlex FSS 50DM Material Processing Sheet

VersaFlex FSS 50DM Chemical Resistance Chart

Contact Us to Learn More

Recent Posts

March 24, 2022
Trenchless Technology Roadshow Presentations

Spray-in-Place-Pipe Rehabilitation  Canadian Induracoat Corporation (Induracoat) will be holding two Spray-In-Place-Pipe Rehabilitation demonstrations at the Trenchless Technology Roadshow in Kelowna, BC on April 25th.  Induracoat is the Canadian Authorized Applicator for the latest generation fast-set pipe lining polymer, Resiline 320 Pipe Renewal Liner.  The details of the presentations are below:  Spray-In-Place-Pipe Lining Demonstration - Monday April […]

Read More
March 2, 2021
AquaVers® Potable Water Spray Polyurea

VersaFlex AquaVers 405 is a superior coating material designed specifically for industrial applications receiving constant or intermittent attack from contained materials, subsurface hydrostatic pressure, most corrosive substances and abrasive action. AquaVers 405 is flexible, accommodating to movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations. With or […]

Read More
March 2, 2021
VersaFlex FSS 50DM Aromatic Spray Polyurea

VersaFlex FSS 50DM is a fast set, rapid curing, 100% solids, flexible, two-component polyurea elastomer spray coating material. FSS 50DM is used by itself or in combination with other materials to produce coatings, liners, wearing courses, and resilient surfaces on metal and other substrates.  FSS 50DM produces an extremely tough film at all thicknesses. Single or multiple pass applications […]

Read More
induracoat dark background logo

Canadian Induracoat Corporation (Induracoat) is a Canadian company and leading applicator of specialized Polyurea Protective Industrial Coatings throughout Canada.

Focusing on the needs and priorities of our customers, Induracoat offers industry leading “Green” solutions through its Polyurea spray coating systems.

Case Studies

Fracture Repair & Containment Coating
Clarifier Tank Tops
Vancouver St. Victoria BC
Fracture Repair & Containment Coating
Clarifier Tank Tops
Vancouver St. Victoria BC

Contact Us

Ph: 1.855.652.0812

Head Office - Victoria
Unit B - 6670 Bertram Place, Victoria BC V8M 1Z6

Vancouver
Unit 121 - 408 East Kent Ave, South Vancouver BC V5X 2X7

Edmonton
4th Floor - 10665 Jasper Avenue Edmonton Alberta T5J 3S9

Winnipeg
Suite 300, 330 St. Mary Ave, Winnipeg MB R3C 3Z5

© Canadian Induracoat Corporation 2022

Website Designed and Maintained by Encompass Marketing & Design

linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram