induracoat dark background logo
induracoat dark background logo

Trenchless Technology Roadshow Presentations

Spray-in-Place-Pipe Rehabilitation 

Canadian Induracoat Corporation (Induracoat) will be holding two Spray-In-Place-Pipe Rehabilitation demonstrations at the Trenchless Technology Roadshow in Kelowna, BC on April 25th

Induracoat is the Canadian Authorized Applicator for the latest generation fast-set pipe lining polymer, Resiline 320 Pipe Renewal Liner. 

The details of the presentations are below: 

Spray-In-Place-Pipe Lining Demonstration - Monday April 25th at 1:30pm 

Location: Parking Lot 

Canadian Induracoat Corporation (Induracoat) will be conducting a demonstration of a trenchless watermain rehabilitation technology referred to as Spray-In-Place-Pipe (SIPP). 

Resiline 320 Pipe Renewal Liner has been specifically developed for the rehabilitation of potable water pipe infrastructure to help greatly extend service life, inhibit internal corrosion, reduce leaks, and improve water quality. 

Resiline 320 is applied using computer controlled robotic spin-cast application technology first developed in Europe 40 years ago. Resiline 320 is both bisphenol- A and VOC free. 

When applied to ductile iron, cast iron, or asbestos cement pipe, Resiline 320 can provide either a water quality corrosion barrier lining or a high build structural lining. 

Same day return to service with no need for bypass piping is possible given the reduction (+/- 90%) to required excavation and the rapid-setting (1 hour) feature of Resiline 320. Disruption to the local community is reduced along with the carbon output and cost savings to the municipality often exceed 50% over full cut replacement. 

Latest Developments in Spray-In-Place-Pipe (SIPP) Watermain Rehabilitation – Monday April 25th at 3:30pm 

Location: Kootenay Room 

Hosted by Andrew Donald, Global Business Development Manager of RESIMAC Ltd. 

Andrew Donald has over 30 years’ experience with coatings for pipelines.  Andrew started his career at E Wood Ltd in the UK who developed the first generation of rapid setting, Spray in Place Pipe (SIPP) lining materials for drinking water pipes in the late 1990s to address water quality issues in the UK water distribution network.  Following the acquisition of E Wood Ltd in 2007 by 3M Company Andrew oversaw the growth of the 2nd generation semi-structural rapid setting SIPP lining materials in Europe as well as managing 3Ms Oil and Gas pipeline coating portfolio. 

In 2021 Andrew joined Resimac Ltd as Global Business Development Manager, Resimac developed and launched the 3rd generation rapid setting SIPP lining material Resiline 320 in 2019 gaining NSF 61 approval in 2020 and DWI Reg 31(4)(a) in the UK earlier this year. 

The Trenchless Technology Road Show 

Date: April 24-26, 2022 

Location: Delta Hotels by Marriott Grand Okanagan Resort, Kelowna BC 

Contact Us to Learn More

Recent Posts

March 24, 2022
Trenchless Technology Roadshow Presentations

Spray-in-Place-Pipe Rehabilitation  Canadian Induracoat Corporation (Induracoat) will be holding two Spray-In-Place-Pipe Rehabilitation demonstrations at the Trenchless Technology Roadshow in Kelowna, BC on April 25th.  Induracoat is the Canadian Authorized Applicator for the latest generation fast-set pipe lining polymer, Resiline 320 Pipe Renewal Liner.  The details of the presentations are below:  Spray-In-Place-Pipe Lining Demonstration - Monday April […]

Read More
March 2, 2021
AquaVers® Potable Water Spray Polyurea

VersaFlex AquaVers 405 is a superior coating material designed specifically for industrial applications receiving constant or intermittent attack from contained materials, subsurface hydrostatic pressure, most corrosive substances and abrasive action. AquaVers 405 is flexible, accommodating to movement of the substrate, yet strong enough to remain intact under all conditions except major structural dislocations. With or […]

Read More
March 2, 2021
VersaFlex FSS 50DM Aromatic Spray Polyurea

VersaFlex FSS 50DM is a fast set, rapid curing, 100% solids, flexible, two-component polyurea elastomer spray coating material. FSS 50DM is used by itself or in combination with other materials to produce coatings, liners, wearing courses, and resilient surfaces on metal and other substrates.  FSS 50DM produces an extremely tough film at all thicknesses. Single or multiple pass applications […]

Read More
induracoat dark background logo

Canadian Induracoat Corporation (Induracoat) is a Canadian company and leading applicator of specialized Polyurea Protective Industrial Coatings throughout Canada.

Focusing on the needs and priorities of our customers, Induracoat offers industry leading “Green” solutions through its Polyurea spray coating systems.

Contact Us

Ph: 1.855.652.0812

Head Office - Victoria
Unit B - 6670 Bertram Place, Victoria BC V8M 1Z6

Vancouver
Unit 121 - 408 East Kent Ave, South Vancouver BC V5X 2X7

Edmonton
4th Floor - 10665 Jasper Avenue Edmonton Alberta T5J 3S9

Winnipeg
Suite 300, 330 St. Mary Ave, Winnipeg MB R3C 3Z5

© Canadian Induracoat Corporation 2024

Website Designed and Maintained by Encompass Business Solutions

linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram